Wednesday, June 1, 2016

Less is More | Architonic

The age-old maxim that “if something’s worth doing, it’s worth doing well” is epitomised by the approach of Danish design brand LoCa, which for more than two decades has focused on the production of a limited but exquisitely manufactured range of products. Inspired by the legacy of great Danish design and craftsmanship, the company has steadily established itself as one of the country’s premier design brands. The LoCa story began in 1992, when its founder, engineer Thorkild Lundsgaard was searching for an attractive and functional coat rack to install in his daughter’s bedroom. Not satisfied with the options available on the market, Lundsgaard set about trying to produce something suitable in his garage. The first attempts were unsuccessful, but the pursuit of a high-quality solution led Lundsgaard to approach the design studio of Harrit & Sørensen, which helped him develop the iconic Knax coat rack. The elegant and precisely detailed design was launched in 1995 and has been a bestsell



from New stories by Architonic http://ift.tt/1TZ0vr5

3 Ways to Get a Steam Shower at Home

Content originally published and Shared from http://perfectbath.com

Are you considering a steam shower as part of your bathroom remodeling project? If so, you will want to consider some ways to get a steam shower and experience restorative healing in the comfort of your own home.

DZ984F9_steam-shower-for-two

Below are 3 ways to get a steam shower at home:

Update Existing Shower
A huge determining factor when it comes to the cost of a new steam shower is whether homeowners are upgrading an existing shower or installing a brand new one in their home. In some cases, updating an existing shower stall to a steam shower may be more expensive, because there are so many changes and additions that need to be made. Just some of the factors that need to be considered when upgrading to a steam shower in a bathroom remodel include:

  • Ceiling: Has to be sloped to prevent dripping condensation
  • Wood Sealant: All visible wood needs to be protected
  • Waterproof Membrane: Needs to be installed on all backer board in the bathroom
  • Fixtures: Need to be sealed to prevent water or humidity damage
  • Generator: Needs to be installed within 25 feet of the shower stall
  • Seals: Existing shower stalls need to upgrade their seals to keep steam inside Source: Improvenet

Built-In Steam Showers
A built-in steam room allows you some flexibility in that you can design it specifically to accommodate the locations of the plumbing and electrical hookups and the placement of the steam generator.
Much the same as a converted shower stall, any built-in steam shower should be made from materials that will stand up to the moisture and the slipperiness that comes with it. Flooring materials should have enough grip to minimize any chance for slipping. Slips not only risk injury due to falls but they also risk possible contact with the steam shower head(s) that can cause burns.
If you’re considering a built-in unit it’s a good idea to consult the right professionals to help with the job. That way you’ll be sure you’ve convered all the bases from using the right materials to including the correct components. Source: Home-Style-Choices

Modular Steam Shower Units
The quickest and easiest way to get a new steam shower is to install a modular unit. Typically priced from $3,000 to $5,000, prefabricated all-in-one modular steam shower units have integral doors, molded seats, steam dispensers, multiple showerheads, and more. In one of these, you can enjoy either a steam bath or a regular shower—and some units even have whirlpool bathtubs at the base.
Basic models are sized and configured to fit the space of a conventional bathtub/shower unit—as a result, replacing an existing tub can be done without excessive reconstruction. Most are designed for easy installation and hookup to plumbing. Source: HomeTips

After hectic office hours or working out at the gym, nothing can give you a better feeling than a great steam shower. For more information, contact us now or email us here.

Contact:
Perfect Bath
Phone: Toll Free 1-866-843-1641
Calgary, Alberta
Email: info@perfectbath.com

The post 3 Ways to Get a Steam Shower at Home appeared first on Perfect Bath Canada.



from Perfect Bath Canada http://ift.tt/1UvC43c

Tuesday, May 31, 2016

The Taste of Technology | Architonic

Some 35 years after its inception in the Friuli Venezia region of northern Italy, internationally renowned kitchen brand Valcucine still leads the global pack in terms of design, detailing and tech-savvy. It hasn’t done this by responding to trends or fashions however, but by focusing on long-term key values such as well-being, timelessness and innovation. Well-being in the sense of ergonomics, tactility and ease-of-use (Valcucine pioneered the fully equipped back panel in the 1990s, a place for storage, illumination and power sockets); timelessness because its main ethos has long been sustainability, recyclability and durability (and timelessness means you are less likely to want to throw out your kitchen when you get bored); and innovation because, well, the brand was the first company to make a kitchen – Artematica with Invitrum base units – where all the units and doors are 100% recyclable, as well as the first to produce a system – Riciclantica – where the unit doors and panels me



from New stories by Architonic http://ift.tt/1TWIU2W

Curtain Up: Architonic’s new online shop software goes live | Architonic

June 2016 sees the Online Shop Module – developed by Architonic as part of its e-commerce initiative – go live, having been implemented into the website of one of Germany’s leading specialist textiles retailers. Designed specifically for interior decorators and textiles retailers, this cost-effective, cloud-based webshop software enables clients to build revenue-generating e-commerce capability seamlessly into their existing websites, the former dovetailing with the existing look and feel of the latter. <b>Tailor-made for the textiles business</b> Two special plug-ins come as part of the module package, especially developed for the textiles branch. The first is a configurator, which allows end-customers to put together all manner of products, such as curtains, table cloths and cushions, to meet their specific needs. The second is a data cloud that keeps your e-shop updated in real time with the latest product data and images from premium textiles manufacturers Christian Fischbacher, C



from New stories by Architonic http://ift.tt/1t0kOdX

How Veteran Real Estate Investors Buy Homes At A Bargain, *Hint* It’s NOT About The Price

 

 

 

It’s NOT About The Price! 

 

When I met a veteran real estate investor a few years ago, that was when I learned that’s NOT about the price.  Unlike the typical real estate buyer or the so called “investor” who cares about lowballing and buying below tax assesssed and getting the property at below market value, the Veteran Real Estate Investors don’t always think like that.

They think differently.  They think outside of the box.  They think about terms.  

 

 

What?  What do you mean?  Isn’t it about the price?

 

That’s what I thought too.   But, often veteran real estate investors are willing to pay market value or EVEN ABOVE MARKET VALUE if the terms are favorable.  

 

What do you mean if the terms are favorable?

 

What if you could get the seller to give you a mortgage at an incredibly low interest rate?  That would be called a vendor take back mortgage, a term that describes a seller giving you a mortgage so you if you can’t your banks to give you money or give you a good rate, the seller would give you that mortgage and you’d be making your mortgage payments to the seller, either weekly, bi-weekly or monthly or whatever you guys agree to.  

The post How Veteran Real Estate Investors Buy Homes At A Bargain, *Hint* It’s NOT About The Price appeared first on Gary Wong Realty Vancouver, BC.



from Gary Wong Realty Vancouver, BC http://ift.tt/1O3hZSF

Registering Your Golf Cart

Monday, May 30, 2016

Functional textiles with glare and heat protection | Architonic

A world without glass as a construction element is inconceivable for contemporary architecture. Optimising energy efficiency is one of the biggest challenges today. Particularly for new office concepts, such as open plan offices, it is a matter of using and controlling day light to best possible advantage and protecting interiors against over-heating. The ideal internal sun protection option combines design with function and reacts to the user’s requirements with regard to the influence of light and heat from outside, as well as the need for illumination. Even in larger spaces with extensive glass surfaces, a pleasant atmosphere and sense of comfort can be designed into the space conveniently by using the right textile. The reason why Création Baumann is building on the successful collections of “Silver&Steel” and “Metal Base” with further developments. The new GLARE&HEAT Collection which encompasses 140 fabrics, the Swiss, Langenthal based textile specialist is seen as the comprehe



from New stories by Architonic http://ift.tt/1soKvUY